Works in a safe manner and follows all company EH&S rules.
Assists the Operator and also accountable for maintaining product quality, minimizing waste, and maximizing productivity for all orders run on the machine.
Provides assistance to maintenance in changeovers to include, but not limited to, chill rolls, screen pack, etc.
Performs or assists in performing roll changes, machine loading and unloading, changeovers, and cleaning up the machine area at extruder.
Provides roll information of material put on the machine as required while checking to assure material is the proper construction.
Assists Operator in taping rubber rolls and other corrective tasks.
Assists the Operator in performing routine preventive maintenance, monitoring instruments, and operating conditions.
Must operate in the absence of the Operator and be capable of doing so within six months of being a helper.
Operates in an efficient manner, maintains awareness of job safety aspects, and applies safe work practices at all times.
Must wear Kevlar gloves while working with metal bands, cutting down cores, and slab down waste.
Responsible for assisting in making changeovers as fast as possible to improve on productivity and efficiency.
Someone (competent/qualified) must be watching the machine to monitor quality at all times and does not leave the machine without notifying the Operator.
Responsible for maintaining the machine and area in a condition consistent with good housekeeping practices. Daily/Weekly Machine Area: Machine and area around machine is clean & orderly. All foil cores at the machine are peeled down and stacked on skid. All foil racks are broken down and stacked. Deckles are pulled out and plugs and blades are cleaned. Ovens and mezzanines are clean. Primer pans, reservoirs, pumps & hoses are clean. All hopper loader filters and dust canisters are clean. Carriages, dies & frame work around dies are clean. All resin is off floor around machine. Shutdown sheets & poly logs are removed from machine. Excess resin in containers are removed around extruders.
All Ink returned to correct containers and accounted for.
Assists in operation and clean up of printing and priming units and drying ovens.
Performs automatic splicing requiring considerable technique.
Responsible for obtaining raw stock and finished samples for the Lab as required by manufacturing spec.
Writes the footage on the roll tickets on the finished rolls.
Must be capable of setting up and operating, blending, and poly feed systems.
Responsible for notifying warehouse before running out of raw material.
Responsible for ordering cores or cutting own when necessary.
Assists the Operator by operating crane, putting rolls on and taking finished material off machine, setting trim knives, handling drool pans, and any other tasks as directed by the Operator.
Required to peel down foil cores and put scrap foil in boxes provided.
Responsible for checking the bond and the appearance on each finished roll.
Responsible for flagging the bad material to help cut down on the waste at the slitter.
Assists in making corrections to improve quality and efficiency.
Annual training required in hazardous waste management, including contingency plan implementation and effective response to hazardous waste emergencies as defined by this facilities LA DEQ approved plan.This training will be conducted by either the Plant EH&S Coordinator or a qualified outside contractor.
It is your responsibility to follow the procedures and policies that are defined in this facilities Hazardous Waste Management plan during your daily duties that include handling, storage, or transporting hazardous waste at this facility.You are also responsible for following the procedures and policies that are defined in this facilities contingency plan during an emergency or spill of hazardous waste.
Hazardous waste responsibilities for this position are as follows: Responsible for maintaining control of hazardous materials at his machine or area. Responsible for obtaining proper containers for hazardous wastes generated at his machine and for transferring non-hazardous liquid wastes to collection point for transfer to storage tanks(s). Responsible for proper marking of waste containers for storage. Reports to Shift Supervisor or Lead Operator any unlisted waste. Responsible for reporting discharge of hazardous waste. Responsible for cleanup of machine sumps and equipment as required. Responsible for cleaning of empty containers, labeling, and moving "empties" to proper storage areas.
LOADING/UNLOADING OF FLAMMABLE LIQUIDS:It is your responsibility to insure that the following are adhered to during transfer operations: All hoses, pumps, containers, and support equipment used to transport, transfer, store, and pump flammable liquids must be DOT/NFPA/OSHA approved.This includes all tools used to open/seal containers.These tools must be constructed of non-sparking materials
AREA SURVEY AND SURVEYLANCE:You are responsible for insuring that no open flames or ignition sources are present within 20 feet of the area that flammable liquids are exposed to the environment during transfer/pumping operations. You are responsible for insuring that the all hose transfer connection points on the truck/trailer are secured and not leaking before the truck can leave the facility. You are responsible for insuring that all spills are cleaned up immediately in accordance with our Hazardous Waste Management Contingency plan.
No lift trucks or equipment shall be stored outside the facility that will contaminate storm water. You may store equipment outside that is exposed to the environment if the following guidelines are implemented:
All fluids must be drained from the lift truck or equipment and properly stored or disposed of in accordance with this facilities policy. All surface residue must be cleaned from the lift truck or equipment.This must be performed in an area that will allow for 100% containment of both the residue and the cleaning media used.The collected residue and cleaning media mixture must be stored and disposed of in accordance with this facilities Hazardous Waste Management program. Once placed outside for storage, the lift truck or equipment must be tarped.
No bulk storage containers can be placed outside the building or containment areas that will be exposed to the environment.This includes boxes of chemicals or drums, etc.Any storage outside the covered buildings/containment systems of this type requires modification/amendment to our Storm Water Plan. Initiates ideas and develops proposals for improving quality of everything we do as measured by our customers and for reducing costs, in order to make the Division more competitive in the marketplace.
Responsibilities of this position as it directly relates to the finished goods are to do each task correctly the first time to achieve the highest level of quality in the goods that I produce and the service I render.My aim is to continually improve year after year.
The Helpers on the machine are responsible to the Operator.
Performs other duties as assigned by the Shift Supervisor/Shift Lead. Location Homer, LA 71040 US (Primary)
Shift Type Any Shift Category Production Career Level General Job Classification Hourly Travel None Exemption Type Hourly Education High School or GED Salary Range
Location/Region: Homer, LA (US)